Topcon 329390050 Pipe Laser Leg Set for 8-inch Pipe - Set of 4 each - for Topcon Pipe Lasers

The Topcon 329390050 is a factory OEM set of four pipe laser legs engineered specifically for use with Topcon pipe lasers in 8-inch diameter pipe applications. Whether you are laying sewer mains, storm drains, or culverts, these legs position the laser instrument at the precise centerline height inside the pipe—so your reference beam travels true to the grade stake every time. Using the wrong leg height is not a minor inconvenience; it places the beam off-center, corrupts your grade shots, and can result in costly re-work or failed inspections. The 329390050 legs eliminate that risk by delivering the exact geometry Topcon designed into their pipe laser system.

Overview & Jobsite Applications

Topcon pipe laser legs are the unsung workhorses of underground utility installations. Swapped in seconds at the invert, these four legs lock the laser body into a stable, centered position inside 8-inch PVC, concrete, or HDPE pipe. The set is sized and molded to Topcon factory specifications, maintaining consistent standoff from the pipe wall and repeatable instrument height across every setup. Crews running production sewer runs, municipal storm drain projects, or irrigation mainlines in 8-inch pipe will appreciate that these legs load and unload without tools and survive the mud, grit, and water that are standard on any underground job.

Key Specifications

• Part Number: Topcon 329390050
• Compatible Pipe Diameter: 8-inch (nominal)
• Quantity: Set of 4 legs
• OEM / Aftermarket: Genuine Topcon OEM replacement
• Fit: Designed for Topcon pipe laser instrument bodies
• Material: High-impact engineered polymer
• Attachment: Tool-free snap or slide fit per Topcon instrument design

What's in the Kit

• 4 x Topcon OEM pipe laser legs sized for 8-inch pipe
• Factory-matched geometry for Topcon pipe laser centerline positioning
• Ready to install — no additional hardware required

Job Applications

Municipal Sewer Main Installation: Setting 8-inch gravity sewer at tight grade tolerances demands a centered beam. These legs keep your Topcon laser on the pipe centerline so every pipe joint is laid to the engineer's specified slope.

Storm Drain Construction: Storm systems in 8-inch corrugated or smooth-wall pipe require accurate line and grade control to prevent ponding and back-pitch. Correct leg height is the first step to getting that right.

Culvert Replacement Projects: Swapping out deteriorated 8-inch culverts under roads or driveways calls for quick setups and dependable grade control. These legs get the laser running fast and accurate.

Irrigation Mainline Work: Agricultural and landscape irrigation contractors running 8-inch mainlines in trenches rely on pipe laser accuracy to maintain consistent slope for drainage and system performance.

Compatible Accessories

• Topcon TP-L5 Pipe Laser
• Topcon Pipe Laser Leg Sets for Other Pipe Diameters
• Topcon Pipe Laser Carrying Cases
• Topcon Pipe Laser Targets and Grade Rods
• Pipe Laser Remote Controls

Related Guides

• How to Select the Correct Pipe Laser Leg Height for Your Pipe Diameter
• Setting Up a Topcon Pipe Laser for Gravity Sewer Installation
• Pipe Laser Maintenance Tips for Underground Utility Crews
• Topcon Pipe Laser Accessories Buying Guide

Frequently Asked Questions

Will the Topcon 329390050 legs fit my specific Topcon pipe laser model?

The 329390050 leg set is a genuine Topcon OEM accessory designed to fit Topcon pipe laser instrument bodies that use the standard leg-attachment system, sized for 8-inch pipe. Verify your instrument model's leg compatibility in your operator manual or contact our team to confirm fit before ordering.

Can I use these legs in pipe sizes other than 8 inches?

No. These legs are engineered specifically for 8-inch diameter pipe. Using them in a larger or smaller pipe diameter will place the laser beam off-center, producing inaccurate grade and line control. Topcon offers leg sets for a range of pipe diameters — select the set that matches your actual pipe size.

Are these genuine Topcon OEM parts or aftermarket replacements?

The 329390050 is a genuine Topcon OEM part. Express Tools is an authorized Topcon dealer, so you receive factory-spec components backed by Topcon's product standards — not an off-brand substitute that may not match the original geometry.

How do I install or swap the legs on my Topcon pipe laser?

Topcon pipe laser legs are designed for fast, tool-free swaps at the invert of the pipe. Slide or snap the legs into the designated attachment points on the laser body per the instrument's operator manual. Always confirm the laser is seated level and stable before establishing your grade reference beam.