Topcon 9090-1420 Vibration Pole for LS-B100

Mount Your LS-B100 Receiver Where the Work Is

The Topcon 9090-1420 Vibration Pole is purpose-built for mounting the LS-B100 laser receiver on heavy earthmoving equipment. Designed to absorb constant machine vibration while keeping your receiver locked on grade, this pole is an essential component for any contractor running a Topcon laser-based grade control system on bulldozers, motor graders, or soil compactors. When accuracy matters on the cut-and-fill, the 9090-1420 delivers the stable, reliable mounting platform your receiver needs to perform.

System Overview & Jobsite Applications

The 9090-1420 slots directly into Topcon's LS-B100 machine control ecosystem, giving grade operators a solid connection between the receiver and the machine's blade or drum. Whether you're grading a commercial pad, finishing a road sub-base, or compacting a lift for a dam project, this pole keeps your receiver at the correct height and orientation to catch the rotating laser beam. It mounts to standard machine mast brackets and is compatible with both single and dual-slope setups depending on your system configuration. The result is accurate, repeatable grade control that reduces rework and keeps your crew productive.

Key Specifications

• Model Number: 9090-1420
• Compatible Receiver: Topcon LS-B100 laser grade receiver
• Application: Machine control on earthmoving equipment
• Suitable Equipment: Bulldozers, motor graders, soil compactors
• Mounting: Standard machine mast bracket compatible
• Construction: Heavy-duty vibration-dampening design
• Manufacturer: Topcon Positioning Systems

Key Features

• Engineered specifically for vibration-intensive heavy equipment environments
• Secure LS-B100 receiver interface — no improvised adapters required
• Maintains receiver orientation for consistent laser signal acquisition
• Compatible with both single and dual-slope machine control configurations
• Durable construction rated for full-shift, all-weather jobsite use
• Streamlines setup time so operators spend more time on grade
• OEM Topcon part — guaranteed fit and full warranty support

Job Applications

Commercial Site Grading: Mount the LS-B100 on your dozer's blade mast using the 9090-1420 and hit your finished grade elevations in fewer passes. Ideal for parking lots, building pads, and drainage swales where tight tolerances are non-negotiable.

Road Sub-Base Construction: Motor graders equipped with this pole and the LS-B100 receiver can maintain precise cross-slope and longitudinal grade across long runs, minimizing material waste and keeping compaction uniform.

Soil Compaction & Lift Control: Compactors take a serious beating from vibration. The 9090-1420's vibration-dampening design keeps the LS-B100 stable during compaction passes so operators get reliable grade feedback on every lift.

Earthwork & Mass Grading: On large cut-and-fill operations, consistent receiver mounting means your laser control system stays dialed in from the first pass to the last, reducing survey check intervals and keeping the job on schedule.

Compatible Accessories

• Topcon LS-B100 Laser Grade Receiver
• Topcon RL-H5A Rotating Laser Level
• Topcon Machine Control Mast Brackets
• Topcon LS-B100 Receiver Cables & Connectors
• Topcon Grade Control Display Units

Related Guides

• How to Set Up a Laser Grade Control System on a Dozer
• Topcon LS-B100 Receiver Setup & Calibration Guide
• Choosing the Right Machine Control Components for Your Fleet
• Rotating Laser vs. GPS Grade Control: Which Is Right for Your Site?

Frequently Asked Questions

Is the 9090-1420 compatible with any receiver other than the LS-B100?

The 9090-1420 is designed and optimized for use with the Topcon LS-B100 laser grade receiver. While physical mounting may vary, Express Tools recommends using OEM-matched components to ensure system integrity and warranty coverage. Contact us if you need to verify compatibility with another receiver model.

Can this pole be used on a motor grader and a dozer interchangeably?

Yes. The 9090-1420 is compatible with standard machine mast brackets used on multiple equipment types including bulldozers, motor graders, and compactors. Verify that your specific mast bracket configuration matches before swapping between machines.

Does this pole come with mounting hardware?

Topcon OEM components are typically sold as individual items. Check your current kit contents or contact our team at Express Tools to confirm whether additional mounting hardware is needed for your specific machine setup.

What is the warranty on the Topcon 9090-1420?

As an authorized Topcon dealer, Express Tools supports the full Topcon manufacturer warranty on all OEM parts. Contact our team for current warranty terms or to initiate a warranty claim on any Topcon product purchased through Express Tools.