Marson 39045 Air/Hydraulic Riveter MP-3V
This Marson 39045 is NEW and Not Reconditioned.
Marson 39045 Specifications
|
Part Number
|
39045
|
Stroke
|
.787
|
Pulling Force
|
1800 lb
|
Capacity All Materials
|
3/32"-3/16"
|
Marson 39045 Air Riveter Contains :
- Air Rivet Tool 39045 complete and ready to operate
- 4 sets of Jaws M95207 : 1 Set equals 3 pieces - 1 set comes in tool
- 2 Jaw Carriers - 1 Jaw Carrier comes in tool
- 2 Pushers and 2 Pusher Springs - 1 comes in tool
- Nose Pieces 1 each of the following: 3/32", 1/8", 5/32" 3/16"
- Bottle of Lubrication Oil
- Lubrication Syringe
- L-Hex Wrech
- Open End Wrench 15x16mm, 10x12mm, 16x17mm
Marson 39045 Air Riveter Product Overview
This newly designed light-duty air/hydraulic riveter is Ergonomically designed with the professional in mind. The Light weight, well balanced MP-3V includes Vacuum System and design to maximize stroke and pull force with a 3 jaw setup to get the job done. Direct connect or use the attached swivel for operator convenience. Each tool is supplied with nosepieces to set 3/32”- 3/16” rivets in all alloys. Includes adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and a removable swivel air connection line with air off/on valve built in. An adjustable Vacuum System control located inside the mandrel collection bottle allows you control the force of the air needed to hold the rivet in place or you may operate with the vacuum system turned off.
Recommended air pressure is 60-95 PSI.
Weight: 2.9 lbs