Makita HR4041C 1-9/16" Spline Rotary Hammer
This Makita HR4041C is NEW and Not Reconditioned.

POWERFUL 12 AMP MOTOR FOR THE MOST DEMANDING JOBS.  This Makita HR4041C Spline Drive Rotary Hammer features a dual purpose selector switch, allowing you to choose Hammer Only Mode or the Hammering with Rotation Mode.  This gives you a tool that can not only drill holes in concrete but the ability to perform chipping job as well.  This technology by Makita has also emplimented a feature for No Hammering while Idling.  This greatly increases the tools life.  The HR4041C also has a Torque Limiting Clutch that Disengages if the Bit becomes Jamed.   An electronic variable speed control dial enable the user to set speed for a particular application.  This Makita HR4041C is the Hammer that offers you a FASTER DRILLING SOLUTION.

The Makita HR4041C Features:

• Powerful 12.0 AMP Motor delivers 230-460 RPM and 1,300-2,600 BPM for the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
• Makita Motor Advantage includes field core interlocking steel laminations, dual ball bearing armature, and large surface commutator, resulting in the most efficient transfer of energy for more power and longer tool life
• Automatic brush cut-off protects commutator from damage for longer tool life
• 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
• "No hammering when idling" function helps increase tool life
• High quality aluminum housing allows for greater durability and longer tool life
• Accepts Spline bits

The Makita HR4041C Product Specifications:

• Capacity-Concrete 1-9/16"
• Core Bit-4-5/8"
• No Load Speed-230-460 RPM
• Blows per Minute-1,300-2,600 BPM
• Impact Energy-9.2 Joules,6.8 ft.lbs.
• AMPS (110V)-12.0
• Bit Type-Spline Bits
• Cord Length-16.4 ft.
• Overall Length-16-7/8"
• Net Weight-14.8lbs
• Shipping Weight-28.6lbs 

The Makita HR4041C Includes: 

• Side Handle 416549-4
• Depth Gauge 321248-4
• Tool Case