Kett KD-200 18-Gauge Electric Power Shears
This KD-200 Shear is a NEW Tool and Not Reconditioned

Kett KD-200 The Details :
These double-cut shears feed quickly and quietly, without warping or bending your finished piece (distortion is in the waste strip). It easily follows a scribed line. The materials edges are not hardened or burred, so you get maximum use of a sheet. The swiping action of blades seals the edge of coated metals. These shears cut C.R. mild steel up to 18 gauge in straight or contour lines at over 300 inches per minute, most grades of stainless and plastic or Formica up to 3/32" thick. These shears are also available with a contour cutting blade KD-200C to cut tighter curves and the HS blade KD-200HS for cutting foam filled doors.

Kett KD-200 Features :

• 5.0 amp pistol grip, single speed, 2500 RPM motor.
• Replaceable A‐2 tool steel shear blades.
• Cuts C.R. mild steel 18 gauge and lighter, most grades of stainless steel to 20 gauge.
• Cuts up to 180 inches per minute.
• With the 7/32” waste strip, you get a clean burr free cut.
• Lightweight and easily maneuverable. Can cut a 6” radius.

Kett KD-200 Specifications :

• Amps 5.0
• RPM 2500
• Power source 120 volts
• Shear head 60‐20 aluminum
• Cutting speed 300 inches per minute
• Minimum cutting radius 6 inches
• C.R. Mild steel 18 gauge
• Stainless steel 20 gauge
• Length 14”
• Weight 4 pounds